My Experience With Kohler 84999 Toilet Seat Anchor Kit

My Experience With Kohler 84999 Toilet Seat Anchor Kit

Recently, I had to replace the toilet seat in my bathroom. While removing the old seat, I realized that the anchor bolts were rusted and could not be reused. I decided to purchase the Kohler 84999 Toilet Seat Anchor Kit to help with the installation of the new seat. This kit had great reviews, and I was excited to give it a try.

What is the Kohler 84999 Toilet Seat Anchor Kit?

The Kohler 84999 Toilet Seat Anchor Kit is a set of anchor bolts and mounting hardware designed to securely attach a toilet seat to the toilet bowl. The kit includes two plastic bolts, two plastic nuts, and two rubber gaskets. The plastic bolts are designed to break off when the nut is tightened to prevent over-tightening and cracking the toilet bowl.

Step by Step Guide for Installing Kohler 84999 Toilet Seat Anchor Kit

1. Remove the old toilet seat and clean the toilet bowl.

2. Insert the rubber gasket into the mounting hole on the toilet bowl.

3. Insert the plastic bolt through the mounting hole and gasket.

4. Repeat Step 3 for the other mounting hole.

5. Place the new toilet seat onto the plastic bolts.

6. Insert the plastic nut onto the bolt and hand tighten.

7. Use a wrench to tighten the nut until it breaks off the bolt.

8. Repeat Step 7 for the other nut.

9. Adjust the seat alignment as necessary.

10. Enjoy your newly installed toilet seat!

Top 10 Tips and Ideas for Using Kohler 84999 Toilet Seat Anchor Kit

1. Make sure to clean the toilet bowl thoroughly before installing the kit.
2. Do not over-tighten the nuts as it may crack the toilet bowl.
3. Adjust the seat alignment before tightening the nuts.
4. If the plastic bolts are too long, cut them to the desired length using a hacksaw.
5. If the plastic bolts are too short, purchase longer bolts separately.
6. If the rubber gaskets are missing or damaged, purchase replacements separately.
7. Check the nuts periodically to ensure they are still tight.
8. If the nuts become loose, tighten them immediately to prevent the seat from shifting or wobbling.
9. If the toilet bowl is cracked or damaged, do not attempt to install the kit. Replace the toilet bowl instead.
10. If you encounter any difficulties during installation, consult the instruction manual or contact Kohler customer service for assistance.

Pros and Cons of Kohler 84999 Toilet Seat Anchor Kit

Pros:

• Easy to install
• Prevents over-tightening
• Securely attaches toilet seat to toilet bowl
• Includes all necessary hardware
• Durable plastic bolts and nuts

Cons:

• May not fit all toilet seat models
• Plastic bolts may break during installation
• May not be as strong as metal bolts

My Personal Review and Suggestion for Kohler 84999 Toilet Seat Anchor Kit

Overall, I am very satisfied with the Kohler 84999 Toilet Seat Anchor Kit. It was easy to install and securely attaches the toilet seat to the toilet bowl. The plastic bolts and nuts seem to be durable, and I appreciate the design that prevents over-tightening. However, I did encounter some difficulty when the plastic bolt broke during installation, but I was able to use the spare bolt included in the kit without any issues. My suggestion would be to have some spare plastic bolts on hand just in case. Overall, I would recommend this kit to anyone in need of a reliable and easy-to-install toilet seat anchor kit.

Question & Answer and FAQs

Q: Will the Kohler 84999 Toilet Seat Anchor Kit fit all toilet seat models?

A: No, the Kohler 84999 Toilet Seat Anchor Kit may not fit all toilet seat models. It is recommended to check the compatibility before purchasing.

Q: Can the plastic bolts be replaced with metal bolts?

A: It is not recommended to replace the plastic bolts with metal bolts as it may damage the toilet bowl.

Q: How often should I check the nuts to ensure they are still tight?

A: It is recommended to check the nuts periodically, especially after the first few uses, to ensure they are still tight.